How to Hide Baby Monitor Cord?

How to Hide Baby Monitor Cord
September 20, 2022

If you have a baby monitor, chances are you’ve also got a big cord running from the camera to the receiver. And if you’re like most parents, that cord is probably an eyesore. Here’s how to hide baby monitor cord so it’s out of sight and out of mind.

  • Locate the baby monitor cord and find a spot to hide it
  • Measure the length of the cord and cut a piece of duct tape that is slightly longer
  • Wrap the duct tape around the cord, starting at the base of the monitor and working your way down
  • Trim off any excess duct tape with a sharp knife or scissors

How To Hide Baby Monitor Cord Step by Step Guide

How Do You Cover Baby Monitor Cables?

If you have a baby monitor, chances are you’ve also got a tangled mess of cords. Here’s how to wrangle them into submission. First, unplug the monitor from the power outlet and untangle the cords.

Next, measure the length of each cord and cut a piece of duct tape that is twice as long. Fold the duct tape in half so that the sticky side is facing out and wrap it around the middle of each cord. Make sure to smooth out any bubbles or wrinkles in the tape.

Now take another piece of duct tape and wrap it around all of the cords, starting at one end and working your way to the other. This will help keep them together and make it easier to manage them when you’re plugging/unplugging things. Finally, plug everything back in and admire your handiwork!

No more tangled cords!

How Do You Mount a Baby Monitor Without Drilling the Wall?

There are a number of ways to mount a baby monitor without drilling the wall. Perhaps the simplest is to purchase a monitor that can be placed on a table top or dresser. Another option is to use command strips or Velcro to attach the monitor to the wall.

If you do want to drill into the wall, there are special mounts available that don’t require very large holes.

Where is the Best Place to Put a Baby Monitor?

Most parents put a baby monitor in their child’s room, so they can hear if the baby is crying or making noise in the middle of the night. But there are other places you can put a baby monitor, depending on your needs. If you want to be able to see your baby while they sleep, you can put the monitor on a dresser or shelf near the crib.

This way, you can still hear your baby if they cry, but you can also see them and make sure they are okay. Some parents like to put the monitor in their own room so they can hear their baby, but not have to get up every time they cry. This way, you can still get a good night’s sleep and be rested for taking care of your little one during the day.

You could also put the monitor in the nursery so you can see and hear your baby while you are doing other things around the house. This is helpful if you need to take a shower or do some laundry while your baby is sleeping. Ultimately, it depends on what works best for you and your family.

There is no right or wrong answer when it comes to where to put a baby monitor.

Can I Plug a Baby Monitor into an Extension Cord?

Using an extension cord with a baby monitor is not recommended. While it may seem like a harmless way to get around not having a outlet near the crib, there are potential dangers. The biggest danger is that the cord could become wrapped around the baby’s neck, leading to strangulation.

Even if the cord is not wrapped around the neck, it could still pose a tripping hazard. If you must use an extension cord with your baby monitor, make sure to keep it away from the crib and out of reach of your child.

How to Hide Baby Monitor Cord?


How to Hide Baby Monitor Camera

If you’re looking for a way to hide your baby monitor camera, there are a few things you can do. One option is to purchase a camera cover. These covers typically come in black and white and can be found at most stores that sell electronics.

Another option is to use black electrical tape to cover the lens of the camera. This will make it difficult for anyone to see what the camera is recording. Finally, you can simply unplug the baby monitor when you’re not using it.

This will prevent anyone from being able to access the footage without your permission.

Cord Cover

Cord covers are an essential part of any home or office. They provide a neat and tidy way to keep cords organized and out of the way. But did you know there are different types of cord covers?

Here’s a quick guide to help you choose the right one for your needs. The most common type of cord cover is the plastic channel. These come in various sizes and lengths, and can be cut to fit your specific application.

They have a lip that helps keep cords in place, and can be mounted with adhesive tape or screws. For a more permanent solution, metal cord covers are also available. These are typically made from aluminum or steel, and can be powder coated to match your décor.

They install just like plastic cord covers, but offer a more durable solution. If you need to run multiple cords through the same area, consider using Raceway wire molding. This type of cord cover conceals wires within its channels, allowing you to paint or wallpaper over it for a completely finished look.

It comes in both straight and corner pieces, so you can create custom runs to suit your space. Just be sure to check the maximum capacity before installing, as overloaded raceways can pose a fire hazard. No matter what type of cord cover you choose, make sure it is rated for indoor use if that’s where it will be installed.

Outdoor-rated cord covers are also available for running cables through exterior walls.

Diy Baby Monitor Mount

When it comes to monitoring your baby, there are a lot of different options available on the market. But if you’re looking for a more affordable option, or one that you can customize to fit your specific needs, then consider making your own DIY baby monitor mount. Here’s what you’ll need:

– A wooden board (we used a 1×8) – Drill – Jigsaw

– Sandpaper – Paint or Stain (optional) – 4 Screws

– 4 Washers -4 Nuts Start by measuring and cutting your wood to size.

We cut ours down to about 18″ long. Then use the drill to make four pilot holes in each corner of the board. Next, use the jigsaw to cut out any intricate shapes or designs (like we did for our “S” shaped mount). Once everything is cut out, sand down any rough edges and paint or stain your wood if desired. Now it’s time to assemble!

Place a washer on each screw and then thread them through the pilot holes in the wood. On the other side of the board, add another washer and then screw on a nut until tight. Repeat this process for all four screws.

And that’s it – you now have a custom made baby monitor mount that can be used however you see fit!


If you have a baby monitor cord that you need to hide, there are a few things that you can do. One option is to use cord covers. These are available in a variety of colors and styles, so you can find one that matches your décor.

Another option is to use wire management products. These can be found at most hardware stores and will help you keep the cord hidden and organized.

Leave a Reply

Your email address will not be published. Required fields are marked *